Usually, as your house heats up, the temperature control starts to learn the elevated temperature and consequently signals your HVAC method to turn on and cool down your home.
If your air conditioner stops running before your house has attained the set temperature, this indicates a complication referred to as short-cycling that several factors can cause. These factors include dirty or clogged air filters, causing airflow restrictions throughout the a/c system, leading to overheating and ultimately the premature end of a cycle. Frozen evaporator coils may also lead to short cycling. This may occur if you run the air conditioner while the outdoor HVAC component has frozen, please turn off your method and let it thaw completely before turning it on. If your place is too small for your conditioner, the conditioner will put out excessive cool air and lead to short cycling. Replacing your oversized method with one that suits your house better should resolve this issue, but when a refrigerant leaks, refrigerant levels run low and force your air conditioner to work harder to cool your home. This will eventually lead to malfunctioning. Problems with the electrical method of your A/C will also result in short cycling. To fix your short cycling problem, you may need to remove and replace your air filter with one that your HVAC provider recommends before turning your method back on. Next, check out your evaporator coils for any ice present and shut off your method until your coils defrost completely. Replace your component with an appropriately sized one and refill your refrigerant, but you may also need to repair or replace the electrical parts inside your central cooling system. The simplest and ultimate thing you can do to prevent short-cycling is correct common repair.