After working for many weeks to build a multi purpose cooling unit, I decided to move on to the heating industry by inventing a multi purpose hot water boiler.
I was quite pleased with the way the cooling unit turned out.
It was above two work as a large window air conditioner as well as a printer. The air conditioner was connected to a smart thermostat where you could also control the printer. With determination, I began taking apart the hot water boiler heating system with a plan to combine it with a dehumidifier. Since a hot water boiler is a type of hydronic heating system, it takes water to run. I made a way that the hydronic heater had an air duct that could collect moisture in the air and send it into the hot water boiler. In this way the furnace would work as a dehumidifier for those who have problems with a moist basement or closet. I also put in a system in the furnace that enabled it to release some steam which could make it work as a room humidifier. Just as I did with the air conditioner, I connected the hot water boiler to a smart thermostat so that the owner could change their furnace from a humidifier or dehumidifier using the smart thermostat. I made blueprints of my printer window air conditioner and my special hot water boiler and sent them into a cooling and heating facility where they build unique HVAC units. My blueprints were accepted and within months thousands of people had printer window ri conditioners and humidifier hydronic heating systems.