For a long time my cooling plan was not toiling so hot. Anytime I turned down the temperature on the temperature control, I knew it was wishful thinking. My A/C plan just never seemed to get cool. I could have heating and slightly cool air. Those were my options. I tried cleaning the air filter, cleaning the indoor A/C unit and sticking a vacuum up inside of it. It wasn’t until I was outside the condo that I deduced the repair. The outdoor unit with my cooling component was at an angle. For a long time I thought that was no giant deal. After not finding the A/C repair, I started researching about outdoor components. A lopsided outdoor unit is no good. The coolant in the plan will all run to one side of the machine. So when the air is cycled and blown, there is no coolant to actually cool down that air due to the angle. It was such a easy repair too. I took some bricks and old pieces of wood to make the unit level again. After it was all squared away, the cooling plan worked savor a champ. I actually have frigid air and the temperature control temperature is matched. The cooling system also makes way less noise than it used to and can actually turn off since it reaches the temperature I want. My energy bills are lower and I am happier in my home. The only issue was just a slightly skewed outdoor unit. Who would have thought? Glad I did the research and noticed it.
The different types of thermostats